How to Repair a Garden Hose

You pull your garden hose out of the garage, screw information technology into the faucet, attach the perfect nozzle, turn on the water and terminate up getting soaked. It's the dreaded hose leak. Don't panic and rush off to replace the damaged hose just yet. With the right tools and these uncomplicated methods, you tin easily repair your hose and get back to watering the lawn in no time.

Pocket-size Leaks

If the h2o didn't squirt yous in your face up, you lot may accept to go on a little hole hunt. When you find the pocket-sized leak, here are your mending options:

  • Option i – Use common electrical tape or specially designed hose repair tape. Get-go, clean and dry the hose before applying. Overlap the tap as you lot wrap it effectually the hose. Don't wrap it as well tightly or the hose will crease and the tape won't seal.
  • Option ii – Use safe cement for tears and punctures. Dry and clean the area and apply safety cement to and effectually the hole. Fill in the hole, but not so much that information technology gets within the hose.
  • Option 3 – Use a tire puncture repair kit. These are usually sold at bicycle repair shops or car part stores. Read the directions and apply the repair materials to the hole.

Leaking Spigot

A leaking spigot is oftentimes a sign that the washer is worn out and needs to be replaced. Washers dry out out or deteriorate with age. Simply remove the old one and put in a new one. If it still leaks, replace the coupling. The coupling is the part that connects to another hose or to the tap.

Big Leaks

Mending a big leak is a little more involved but still simple. This will require cutting the damaged section out and replacing information technology with a mender. Be sure to use a precipitous blade and make straight cuts when doing this. Have the cut-out portion with you when purchasing the replacement parts to be certain you have the proper pieces. Parts volition too depend on whether y'all take a prophylactic or vinyl hose.

  • Stride 1 – Carefully cutting out the damaged portion of the hose with straight lines.
  • Footstep ii – Loosen the screws on the replacement coupler.
  • Step 3 – Insert the cut ends of each department of the hose into the side of the clamp mender. If this function is difficult, rub a little soap on the surface area to make information technology more pliable.
  • Footstep 4 – Tighten the screws until the clamp is tight enough to non pull the hose out.
  • Step 5 – Attach the hose to a nozzle and turn on the water to test out the connection. Keep tightening the connector until h2o no longer leaks.


To avoid having to always repair your garden hoses, it's a good idea to protect them. A well taken care of hose volition last for many seasons. Always drain all the h2o out, keep it out of the dominicus, gyre it after yous're washed using information technology and supercede washers when they show signs of dripping.

Resources institute on our website are provided as full general guidelines, and Reddi Industries does not presume any liability resulting from the provided information.

Leaking Garden Hose